Seam- and edge cutter
Art.-No.
262 289 000
Tip Top - Seam Cutter Perfect seams for all flexible and textile floor coverings with the patented twin-cut method. This type of Seam-Cutter is guided on ball bearings within a parallel guiding rail in order to ensure an absolutely straight cut. The result is a superbly accurate and closed seam that is almost invisible. The integral knee sledge stabilizes the whole working area and guarantees a good working position. Basic model consists of : Guiding Rail 2m (6' 7''), Cutting Sledge, Knee Sledge, Carrying Bag and Transport Securing Devices The most important advantages at a glance: - Cuts from wall to wall without interruption - Material thickness does not affect precision - Much quicker than conventional methods- No costly complaints due to untidy seam cuts- No shifting or moving within the seam area due to the guided cutting sledge
Art.-No.
262 287 000
Circle Cutter PROFI Secured by vacuum cups, enables fast radius adjustment.Scribing or cutting, depending on the adjusted depth. On parquet or laminate a router is connected. Complete with a sheet of acrylic glass, extension up to 130 cm (4' 3 ¼") radius and transport case
Art.-No.
262 247 000
Strip width:
6- 30 cm
Lino- and PVC-Strip Cutter For the cutting of cove bases, strip patterns and stair work. for strip widths 6-30 cm (2 3/8 - 12")
Art.-No.
262 287 100
Extension rail up to 5 m (5 ½ yd.) for Circle Cutter PROFI
Art.-No.
262 412 000
LINOCUT Seam-Cutter For PVC, Linoleum and Needle Punch - Blade adjustable - For use in both directions - Cuts from wall to wall - Cuts the top sheet
Art.-No.
262 412 500
LINOCUTTER Cutting depth and cutting width are infinitely adjustable.Straight blades for scribing andhook blades for cutting of thincoverings.Works with standard blades, whichsaves a lot of cost and pays for thetool over time.
Art.-No.
262 244 900
Cuts strips fast, precisely and safely! LVT planks and tiles can be cut to skirting strips or border-work
quickly, effortless and precisely up to 20 cm wide. The circular blade
can be adjusted in height and fully retracted for protection.
Art.-No.
262 254 600
Acrylic Seam Cutter Newly developed seam cutter for cutting carpets along the ridges. ~~Also suitable for double-cut. Due to the transparent casing the cut seam remains visible so that it can be carried out with maximum accuracy. Recommended by leading carpet manufacturers.
Art.-No.
262 244 500
Edge Strip Master Especially designed for length cuts of large design sheetsand tiles in order to fit them nearly flush to the wall.
comes with a pencil holder with
which parquet/laminate/vinyl
can be easily marked withoutmeasuring
can be transformed quickly into
a strip cutter for cutting skirting
strips effortlessly and accurately comes with 20 straight spare blades
Art.-No.
262 273 000
Strip Cutter For strips from 30-140 mm (1 9/16") (1 3/16 - 5")
Art.-No.
659 100 000
PVC Edge - Trimmer For the production of a 25 degree mitre at PVC - edges Complete with 6 spare blades
Art.-No.
262 289 400
Tip Top - Seam Cutter Accessories Threshold Rail Length 70 cm (2' 3 ½ ")
Art.-No.
262 412 300
LINOCUT Seam-Cutter For PVC, Linoleum and Needle Punch Special Accessories Guide for seam cutting, e.g. next to a skirting board For Edge Cutting
Art.-No.
262 289 500
Lino - Guide By using clamps, the guide is screwed onto the Threshold Rail. Complete with fixing squares The Lino-additive stud cuts perfect seams in combination with the Threshold Rail and the Cutting Sledge.
Art.-No.
262 266 000
Strip Cutter Adjustable from 45 to 100 mm (1 ¾ - 4")
Art.-No.
262 415 500
Lino-Edge-Trimmer For pre-cutting factory edges of linoleum (12 mm) Special Version, 25 mm cut
Art.-No.
262 265 000
Circle Cutter "de Luxe" Ø 30 - 160 mm (1 3/16 " to 6 ¼")
Art.-No.
262 244 700
Bevelling Master Bevelling and cutting without interim assembly
Art.-No.
262 412 200
LINOCUT Seam-Cutter For PVC, Linoleum and Needle Punch Special Accessories Guide for seam cutting, e.g. next to a skirting board for Cove Base
Art.-No.
262 244 360
Tube & Sheet Drill kit for LVT comes in case incl.
Drill 4 20 mm
Drill 16 30.5 mm
Handle
Art.-No.
262 247 250
Reversion set for hooked blades for Lino- and PVC-Strip Cutter (green design)