Crosscutting System KSS 40 18M bl
Art.-No.
240 996 400
Please log in with the account we have activated so that you can use the shop to its full extent.
Art.-No.
240 996 400
Product information
When it comes to internal finishing work, there is no better helper
than the KSS 40 18M bl, whatever the task in hand: be it for floors,
walls, doors, furniture, ceilings or roof battens – to make cross or rip cuts,
rail-guided cuts, miter or compound miter cuts at angles up to 45°, or even plunge cuts.
Technical Data
| Angle cuts: | + 45° – - 60° |
|---|---|
| Battery capacity: | Li-Ionen |
| Battery voltage: | 18 V |
| Idle speed: | 6.700 rpm |
| Power: | 94 Wh |
| Swivel range: | 0 – 45° |
| Weight with cross cutting rail (including battery): | 3,65 kg |
| Weight without cross-cutting ral (including battery): | 2,8 kg |
| With guide rail at 45°: | 0 – 27 mm |
| with guide rail at 90°: | 0 – 40 mm |
| without guide rail at 90°: | 0 – 42 mm |
Scope of Delivery
Comes the MAFELL T-MAX case complete with 1 Flexi-Guide rail FX
140,
2 clamping claws, 1 Parallel guide fence, 1 Chip bag, 1 Hose
connector,
1 Allen key, 1 TCT sawblade 120 x 1.2/1.8 x 20 mm, ATB,
24 teeth, for universal use with wood, 2 battery PowerTanks 18 M 94,
1 battery PowerStation APS 18 M
This might also interest you
Skip product gallery
This might also interest you
Art.-No.
240 996 100
Flexi guide FX 140 for KSS 300 crosscutting system Accessories Flexi guide FX 140 (length 1,4 m / 3' 3 ¾")
Art.-No.
240 996 200
A small machine for large jobs. One system, five saws, one box. The KSS 300 works as a crosscut
saw,plunge cut saw, shadow gap saw, handsaw or circular handsaw
for guided cuts with Flexi-Guide. Precise cuts up to 1.4 m (3’3 ¾”) are possible in combination with the flexiguide
(see special accessories).
Art.-No.
240 996 002
120 x 1,2/1,8 x 20 mm, 40 trapezoidal teeth (4 ¾ x 3/64 / 5/64 x ¾“)